TM 1-1520-238-23
2-349
2.95.
RIGHT AFT SIDE TRANSMISSION ROTOR SUPPORT STRUT ASSEMBLY
REMOVAL/INSTALLATION – continued
b. Install strut (2) on base (7) and strut (8). Torque
nut (11) 3360 to 3640 INCH-POUNDS.
(1) Aline strut (2) with base (7) and strut (8). Use
driftpin.
(2) Install bolt (10) through washer (13), strut (8),
base (7), and strut (2).
(3) Hold bolt (10). Use box wrench.
NOTE
Nut may be reused if run-on torque ex-
ceeds 50 INCH-POUNDS.
(4) Ensure nut (11) has no less than 50 INCH-
POUNDS run-on torque. Use torque wrench.
(5) Install washer (12) and nut (11) on bolt (10)
finger tight.
(6) Hold bolt (10). Use box wrench.
(7) Torque nut (11) to 3360 INCH-POUNDS. Use
torque wrench, adapter, and 5-inch
extension.
(8) Increase torque to aline cotter pin hole, but do
not exceed 3640 INCH-POUNDS.
(9) Install new cotter pin (9).
GO TO NEXT PAGE
7
2
10
8
11
13
M04-1474-6
12
10
M04-1474-7
11
9
12
