TM 1-1520-238-23
2-350.2
Change 2
2.95A.
LEFT HAND OR RIGHT HAND LONGERON REMOVAL/INSTALLATION – continued
2.95A.3. Removal
a. Detach connector (P60 right hand or P61 left
hand) (1) from receptacle (J60 right hand or
J61 left hand) (2).
NOTE
When removing wire harness support
brackets from longeron, use steps b.
thru d. for left hand and steps e. thru g.
for right hand.
Fairing is removed with wire harness
receptacles attached.
b. Remove transmission access panel support
fairing (3) from firewall (4).
(1) Remove two screws (5) and washers (6).
(2) Remove four bolts (7) and washers (8).
(3) Remove fairing (3) from firewall (4).
NOTE
Support brackets are removed from lon-
geron with wire harness, tube, and hose
clamps installed.
c. Remove three wire harness support brackets,
(9), (10), and (11) from left hand longeron (12).
(1) Remove twelve screws (13) and washers
(14) from longeron (12) and support brackets
(9), (10), and (11).
(2) Remove brackets (9), (10), and (11) from lon-
geron (12).
GO TO NEXT PAGE
M04-5105-11
1
2
LEFT HAND SHOWN
M04-5105-3
7
8
5
6
4
8
7
3
8
14
13
11
14
13
14
13
12
10
9
M04-5105-4
