TM 1-1520-238-23
2-444
Change 2
2.123.
NOSE GEARBOX FAIRING AND SHROUD REMOVAL/INSTALLATION – continued
h. Remove and discard four tiedown straps (20)
and rubber strips (21) from anchors (22).
i. Remove clamp (23) from wire harness (24)
and fan (25).
(1) Remove screw (26), washer (27), and brack-
et (28) from fan (25).
(2) Hold nut (29). Remove screw (30), washer
(31), bracket (28), and clamp (23) from wire
harness (24).
j. Detach connector P61 (32) from receptacle
J61 (33) on nose gearbox No. 1.
k. Detach connector P60 (32) from receptacle
J60 (33) on nose gearbox No. 2.
l. Remove shroud (34) from gearbox (35).
(1) Hold lower half of shroud (34) in place. Open
hook-and-pile fasteners (36).
(2) Remove both halves of shroud (34) from
gearbox (35).
2.123.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.123.5. Inspection
a. Check fairings and shroud for cracks, nicks,
and scratches (para 2.11).
b. Check for loose or missing hardware (para
2.11).
c. Check detached connectors and receptacles
for damage (para 2.11).
d. Check fairing for corrosion (para 1.49).
e. Check shroud seals for tears and deteriora-
tion. None allowed. Replace seals (para 2.124A).
f. Check fairing seals and bumpers for tears and
deterioration. None allowed. Replace seals and
bumpers (para 2.124B).
g. Check fairings for cracked or broken latches.
None allowed. Replace latches (para 2.124C).
GO TO NEXT PAGE
33
M04-2200-14
32
20
25
30
23
28
24
31
27
26
29
21
20
22
24
35
36
M04-2200-7
34
