TM 1-1520-238-23
2-446
2.123.
NOSE GEARBOX FAIRING AND SHROUD REMOVAL/INSTALLATION – continued
f. Install upper aft fairing (18).
(1) Secure four stud nuts (19).
g. Install lower aft fairing (16).
(1) Secure three stud nuts (17).
h. Install forward fairing (13).
(1) Aline fairing (13), using guide pins (15), with
aft fairings (16) and (18).
(2) Slide forward fairing (13) aft until guide pins
(15) are firmly seated.
(3) Lock four latches (14).
i. Install tiedown strap (10) and rubber strip (11)
on lower aft fairing (16) anchor (12).
(1) Install tiedown strap (10) through an-
chor (12). Use strap (item 192, App F).
(2) Secure tiedown strap (12) and rubber strip
(11) around wire harness (9). Use nonmetallic
special shaped section (item 129, App F).
j. Install screw (5), washer (6), clamp (7), and
spacer (8) to wire harness (9).
(1) Place clamp (7) around wire harness (9).
(2) Install screw (5), washer (6), and spacer (8).
k. Attach connector P47 (1) to receptacle J47 (2)
and connector (HR3)P2 (3) to receptacle J2 (4)
on nose gearbox No. 1.
l. Attach connector P48 (1) to receptacle J48 (2)
and connector (HR4)P2 (3) to receptacle J2 (4)
on nose gearbox No. 2.
GO TO NEXT PAGE
18
15
13
M04-2200-16
19
17
14
16
M04-2200-17
11
10
12
2
4
3
1
16
7
9
5
6
8
9
