TM 1-1520-238-23
2-448
Change 6
2.124.
NOSE GEARBOX FUSELAGE FAIRING CONTROL MODULE ASSEMBLY
REPLACEMENT
2.124.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.124.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Strap (item 193, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-264-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.123
Nose gearbox fairing removed
NOTE
This task is typical for left and/or right
nose gearbox fairings.
2.124.3. Removal
a. Remove control module assembly (1) from
nose gearbox fairing (2).
(1) Remove and discard tiedown strap (3) from
fairing (2).
(2) Remove two screws (4) and washers (5) from
module (1).
(3) Remove six screws (6) and washers (7) from
module (1).
(4) Remove and discard module (1) from fairing
(2).
GO TO NEXT PAGE
M04-4541-1
M04-4541-2
4
5
7
2
1
6
3
