TM 1-1520-238-23
2-656
2.180.
TRANSPARENT CREW PROTECTION ARMOR BARRIER REPLACEMENT – continued
g. Install strap (1) on structure (2).
(1) Install 22 screws (3) through washers (5) and
strap (1) in structure (2).
(2) Install four screws (4) through washers (5)
and strap (1) in structure (2).
CAUTION
To prevent damage to FIRE PULL
switches and wiring, do not twist wires
when positioning switches.
To ensure correct installation, check
placard on T-handles before final
installation of switch in instrument pan-
el. Failure to do so could result in plac-
ard being upside down.
h. Install pilot FIRE PULL switches (28) and (29)
on panel (30).
(1) Remove screw (33) and T-handle (31) from
switch (28).
(2) Insert switch (28) through panel (30) to aline
mounting holes.
(3) Install two screws (34) through panel (30) in
switch (28).
(4) Install T-handle (31) and screw (33) on switch
(28).
(5) Repeat steps h.(1) thru h.(4) for switch (29),
T-handle (32), screw (33), and two screws
(34).
GO TO NEXT PAGE
M04-3437-13
1
2
3
5
4
5
31
32
M04-3437-20
30
28
34
29
34
33
