TM 1-1520-238-23
4-506
4.152.
COLLECTIVE SERVOCYLINDER ENGINE CONTROL ROD DISASSEMBLY/ASSEMBLY – continued
4.152.6. Assembly
NOTE
Nuts should be finger tight only. Final ad-
justment and torquing of rod ends and
lockwire will be performed during rigging.
a. Install rod end (4) on control rod (2).
(1) Install jamnut (5) on rod end (4).
(2) Install rod end (4) 0.50 INCHES in control rod
(2).
b. Install rod end (1) on control rod (2).
(1) Install jamnut (3) on rod end (1).
(2) Install rod end (1) 0.50 INCHES in control rod
(2).
c. Inspect (QA).
d. Install collective servocylinder engine control
rod (para 4.151).
e. Perform No. 1 and No. 2 engine load demand
spindle rigging (para 4.185).
END OF TASK
M04-3934-2
0.50 IN
4
5
2
3
1
