TM 1-1520-238-23
4-510
4.154.
ENGINE LOAD DEMAND SPINDLE BELLCRANK REMOVAL/INSTALLATION – continued
4.154.3. Removal
a. Remove No. 1 engine load demand spindle
(LDS) forward cable (1) from LDS bellcrank
(2).
(1) Remove and discard cotter pin (3).
(2) Hold bolt (4). Remove nut (5).
(3) Remove bolt (4) from bellcrank (2) and rod
end (6).
b. Remove No. 2 engine LDS forward cable (7)
from bellcrank (2).
(1) Remove and discard cotter cotter pin (8).
(2) Hold bolt (9). Remove nut (10).
(3) Remove bolt (9) from bellcrank (2) and rod
end (11).
c. Remove collective servocylinder engine con-
trol rod (12) from bellcrank (2).
(1) Remove and discard cotter pin (13).
(2) Hold bolt (14). Remove nut (15).
(3) Remove bolt (14) from bellcrank (2) and rod
end (16).
d. Remove bellcrank (2) from support (17).
(1) Remove and discard cotter pin (18).
(2) Hold bolt (19). Remove nut (20).
(3) Remove bolt (19) from support (17) and bell-
crank (2).
GO TO NEXT PAGE
6
2
M04-2317-3
3
4
5
1
7
10
2
M04-2317-4
8
9
11
13
15
16
14
2
12
M04-2317-5
M04-2317-6
19
2
20
18
17
