TM 1-1520-238-23
4-508
4.153.
COLLECTIVE SERVOCYLINDER ENGINE CONTROL ROD ADAPTER
REMOVAL/INSTALLATION – continued
4.153.6. Installation
a. Install adapter (1) on servocylinder (2). Torque
nut (4) 30 to 40 INCH-POUNDS.
(1) Position adapter (1) on servocylinder (2).
(2) Install washer (5) and nut (4).
(3) Hold adapter (1). Torque nut (4) to 30 INCH-
POUNDS. Use torque wrench.
(4) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(5) Install new cotter pin (3).
b. Inspect (QA).
c. Install collective servocylinder engine control
rod (para 4.151).
END OF TASK
3
1
2
5
4
M04-3932-2
