TM 1-1520-238-23
4-528
Change 1
4.159.
NO. 1 ENGINE POWER AVAILABLE SPINDLE CABLE INSTALLATION (PILOT TO
CPG)
4.159.1. Description
This task covers:
Installation.
4.159.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
0.0 - 10.0-pound weighing scale (item 272, App H)
30 - 150 inch-pound 1/4-inch drive click type torque
wrench (item 435, App H)
0 - 30 inch-pound 1/4-inch drive dial indicator torque
wrench (item 445, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
One person to assist
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 9-1090-208-23-1
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
Engine power available spindle (PAS)
cables cannot be intermixed with cables
manufactured by different vendors on the
same engine. Cables that have a metallic
exterior (Controlex) cannot be mixed with
cables that have a black tubing exterior
(Cablecraft) on the same engine. One
side can be Controlex and the other side
can be Cablecraft. Cables must be re-
placed with same exact part number. If
exact part is not available, all No. 1 en-
gine PAS cables (three cables) or No. 2
engine PAS cables (three cables) must
be replaced with new cables (Cablecraft).
GO TO NEXT PAGE
M04-1192-14
