TM 1-1520-238-23
4-562
4.167.
PILOT POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) – continued
NOTE
Power lever handle has spring tension
from the trigger release spring. To pre-
vent loss of spring, hold spring while re-
moving handle.
(5) Remove left power handle (9) from power
lever (10).
(a) Hold handle (9). Remove screw (11).
(b) Hold spring (12). Remove handle (9).
(6) Remove right power handle (13) from power
lever (14).
(a) Hold handle (13). Remove screw (15).
(b) Hold spring (16). Remove handle (13).
(7) Remove seal separator (17) from quadrant
(2).
(a) Loosen two set screws (18). Remove
separator (17).
(8) Remove bolt (19) from quadrant (2).
(a) Remove bolt (19) from nut (20), jam nut
(21), and quadrant (2).
(9) Remove six screws (22) holding lever assem-
bly (1) on left side of quadrant (2).
(a) Remove lockwire.
(b) Remove six screws (22).
GO TO NEXT PAGE
M04-3926-2
15
13
9
12
11
16
14
10
18
18
M04-3926-3
17
2
M04-3926-4
2
19
20
21
M04-3926-5
1
2
22
