TM 1-1520-238-23
4-563
4.167.
PILOT POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) – continued
(10) Remove four screws (23) holding lever as-
sembly (1) on right side of quadrant (2).
(a) Remove lockwire.
(b) Remove four screws (23).
(11) Remove two screws (24) holding lever as-
sembly (1) on right side of quadrant (2).
(a) Remove lockwire.
(b) Remove two screws (24), washers (25),
and wire clamps (26) from quadrant (2).
(12) Remove lever assembly (1) from quadrant
(2).
(a) Slide lever assembly (1) out of quadrant
(2) until trigger releases (27) contact left
and right rubber seals (28) and (29).
(b) Rotate lever assembly (1) 90 degrees
counterclockwise and remove from quad-
rant (2).
b. Remove pilot power quadrant ignition lock
switch (para 4.192).
c. Remove pilot power quadrant panel – RTR
BRK switch (para 4.189).
d. Remove pilot power quadrant panel – ENG
START ADVISORY switch (para 4.190).
e. Remove pilot power quadrant panel – No. 1
and No. 2 ENG IGN OVRD switches (para
4.191).
f. Remove pilot power quadrant panel – No. 1
engine interlock switch (para 4.193).
g. Remove pilot power quadrant panel – No. 2
engine interlock switch (para 4.194).
h. Disassemble power lever assembly (1).
GO TO NEXT PAGE
M04-3926-6
2
23
1
24
25
26
M04-3926-7
1
2
27
29
28
1
2
M04-3926-34
