TM 1-1520-238-23
4-559
4.166.
PILOT POWER QUADRANT REMOVAL/INSTALLATION – continued
c. Install quadrant (11) in console (12).
(1) Lock six quarter turn fasteners (13).
d. Install rod end (1) on No. 1 power lever (2).
Torque nut (5) 14 to 18 INCH-POUNDS.
(1) Set No. 1 power lever (2) to LOCKOUT.
(2) Install bolt (4) through power lever (2) and rod
end (1).
(3) Install nut (5) pon bolt (4).
(4) Hold bolt (4). Torque nut (5) to 14 INCH-
POUNDS. Use torque wrench and crowfoot.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
(6) Install new cotter pin (3).
GO TO NEXT PAGE
M04-1195-8
11
13
12
5
2
4
3
1
M04-1195-10
