TM 1-1520-238-23
4-635
4.181.
NO. 2 ENGINE LOAD DEMAND SPINDLE/POWER AVAILABLE SPINDLE AFT CABLE SPRING
TENSION CLIP REMOVAL/INSTALLATION
4.181.1. Description
This task covers:
Removal. Cleaning. Inspection. Repair. Installation.
4.181.2. Initial Setup
Tools:
Airframe repairmans tool kit (item 377, App H)
Personnel Required:
68G
Aircraft Structural Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1500-204-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access door RN1 opened
4.181.3. Removal
a. Detach connector P22 (1) and P24 (2).
(1) Detach connector P22 (1) from receptacle
J22 (3).
(2) Detach connector P24 (2) from receptacle
J24 (4).
b. Remove spring tension clip (5) from nacelle
firewall channel (6).
(1) Hold two screws (7). Remove nuts (8) and
washers (9).
(2) Remove two screws (7) from channel (6),
spacers (10), and clip assembly (5).
(3) Remove clip (5) and spacer (10).
GO TO NEXT PAGE
1
M04-3931-1
3
2
4
M04-3931-2
5
7
6
10
8
9