TM 1-1520-238-23
6-539
6.130.
INTERMEDIATE GEARBOX TEMPERATURE SENSOR REMOVAL/INSTALLATION continued
6.130.6. Installation
a. Install sensor (1) on boss (2). Torque sensor (1)
to 30 INCH-POUNDS.
(1) Lubricate new packing (3) and new packing
with retainer (4). Use assembly fluid (item 30,
App F).
(2) Install packing (3) and packing with retainer
(4) on sensor (1).
(3) Install sensor (1) on boss (2).
(4) Torque sensor (1) to 30 INCH-POUNDS. Use
crowfoot and torque wrench.
NOTE
If sensor was not replaced, go to step b.
(5) Identify and splice two identified wires (5) to
sensor wires (6) (TM 55-1500-323-24).
b. Inspect (QA).
c. Install access fairings L510 and/or R510 (para
2.2).
d. Perform drive system dynamic maintenance
operational check (TM 1-1520-238-T).
END OF TASK
2
1
M04-551-4
3
4
5
6