TM 1-1520-238-23
7-155
7.42.
COLLECTIVE SERVOCYLINDER INSTALLATION – continued
k. Install rod end (25) on bellcrank (26). Torque
nut (27) 14 to 18 INCH-POUNDS.
(1) Insert bolt (28) through washer (29), bellcrank
(26), and rod end (25).
(2) Check fit of self-retaining bolt (28) (para
11.1).
(3) Hold bolt (28). Install nut (27).
(4) Torque nut (27) to 14 INCH-POUNDS. Use
torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
(6) Install new cotter pin (30).
CAUTION
Ensure tubes are not crossed when
installed.
l. Install primary pressure tube (31) on adapter
(32).
(1) Lubricate threads on adapter (32). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (33). Use crowfoot.
m. Install primary return tube (34) on adapter
(35).
(1) Lubricate threads on adapter (35). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (36). Use crowfoot.
GO TO NEXT PAGE
26
29
25
30
27
M04-795-11
28
M04-795-17
32
35
36
33
34
31
