TM 1-1520-238-23
7-156
Change 6
7.42.
COLLECTIVE SERVOCYLINDER INSTALLATION – continued
n. Install wire harness (37) and tube clamp (38).
Torque screw (39) to 23 INCH-POUNDS.
(1) Position half of clamp (38) between servocy-
linder (3) and tubes (31) and (34).
(2) Position other half of clamp (38) over tubes
(31) and (34). Aline mounting holes.
(3) Install clamp (40) on wire harness (37).
(4) Aline clamp (40) with clamp (38) mounting
holes.
(5) Install screw (39) and washer (41).
(6) Torque screw (39) to 23 INCH-POUNDS. Use
hexagon screwdriver and torque wrench.
o. Install tube clamp (42). Torque screw (43) to 23
INCH-POUNDS.
(1) Position half of clamp (42) under tubes (31)
and (34).
(2) Position other half of clamp (42) over tubes
(31) and (34). Aline mounting hole.
(3) Install screw (43) and washer (44).
(4) Torque screw (43) to 23 INCH-POUNDS. Use
torque wrench.
p. Install utility return tube (45) on adapter (46).
(1) Lubricate threads on adapter (46). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (47). Use crowfoot.
GO TO NEXT PAGE
M04-795-8
41
40
37
31
3
38
34
39
31
42
43
34
44
M04-795-13A
45
46
47
