TM 1-1520-238-23
9-71
9.19.
EMERGENCY BUS TERMINAL BOARD REPLACEMENT – continued
9.19.6. Installation
a. Install new board (2) on box (10).
(1) Position board (2) on box (10).
(2) Install two screws (11) through washers (12)
and board (2) in box (10).
b. Attach wires (4) to board (2).
(1) Position bus bar (9) on studs (7).
(2) Install lugs (8) on four studs (7).
(3) Install four washers (6) and nuts (5) on studs
(7).
c. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.0025 OHM or less. Use ohm-
meter.
d. Inspect (QA).
e. Install cover (1) on board (2).
(1) Position cover (1) on board (2).
(2) Tighten two nuts (3).
f. Perform DC power generation maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-3380-3
2
12
10
11
8
6
5
9
4
7
3
3
1
2
M04-3380-4
