TM 1-1520-238-23
9-102.2
Change 6
9.27.
AC GENERATOR NO. 2 REMOVAL/INSTALLATION – continued
CAUTION
To prevent damage to generator, spline,
spline adapter, or transmission, hold the
generator flush and in alinement during
installation. DO NOT USE QAA TO
PULL UP GENERATOR.
NOTE
If generator spline alinement prevents
installation, aline spline to center by
hand.
d. Torque QAA bolt (15) to 125 INCH-POUNDS.
(1) Seat QAA (14) evenly around generator (2).
(2) Tap in place. Use mallet.
(3) Torque QAA bolt (15) to 125 INCH-POUNDS.
Use torque wrench.
e. Remove generator removal/installation tool
from under generator.
f. Lockwire halves of QAA (14) together. Use
wire (item 226, App F).
g. Lockwire QAA bolt (15) to QAA (14). Use wire
(item 226, App F).
h. Inspect (QA).
GO TO NEXT PAGE
14
15
M04-1089-7A
2
