TM 1-1520-238-23
9-296
Change 1
9.77.
MULTICHANNEL DIMMING CONTROLLER CHASSIS DISASSEMBLY/ASSEMBLY
(AVIM) – continued
(5) Install plate (23) on base (7).
(a) Install six screws (24) through washers
(25) and plate (23) into base (7).
(b) Torque six screws (24) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver
bit holder, and screwdriver bit.
(6) Install plate (16) on base (7).
(a) Position plate (16) with spacers (21) and
(22) attached, on base (7).
(b) Install screw (19) and washer (20)
through plate (16) and spacer (22) into
base (7).
(c) Install two screws (17) through washers
(18), plate (16), and spacers (21) into
base (7).
(d) Torque two screws (17) and screw (19) to
6.5 INCH-POUNDS. Use torque wrench,
screwdriver bit holder, and screwdriver bit.
d. Install alinement pins (10) and brackets (11)
on panel (6).
(1) Install two alinement pins (10) in panel (6).
(2) Install two brackets (11) on alinement pins
(10).
(3) Install two nuts (12), lockwashers (13), and
washers (14) on alinement pins (10).
(4) Torque two nuts (12) to 24 INCH-POUNDS.
Use torque wrench.
GO TO NEXT PAGE
23
M04-4208-19
7
24
25
7
16
17
18
19
20
22
21
M04-4208-20
M04-4208-21
6
11
12
1314
10
