TM 1-1520-238-23
9-293
9.77.
MULTICHANNEL DIMMING CONTROLLER CHASSIS DISASSEMBLY/ASSEMBLY
(AVIM) – continued
9.77.6. Assembly
a. Install brackets (48), left case ground harness
(49), right case ground harness (50), and two
brackets (51) on panel (2). Torque screws (52) to
24 INCH-POUNDS.
(1) Position brackets (48) and (51) on panel (2).
(2) Install four screws (52) through washers (56),
brackets (48), panel (2), and brackets (51).
(3) Install right case ground harness (50) on
screws (52).
(a) Install two terminal lugs (55).
(4) Install left case ground harness (49) on
screws (52).
(a) Install two terminal lugs (54).
(5) Install four nuts (53) on screws (52).
(6) Hold nuts (53). Torque four screws (52) to 24
INCH-POUNDS. Use torque wrench,
screwdriver bit holder, and screwdriver bit.
b. Install front panel (2) on base (7). Torque four
screws (47) to 6.5 INCH-POUNDS.
(1) Position panel (2) on base (7).
(2) Install four screws (47) through panel (2) and
base (7) into brackets (51).
(3) Torque four screws (47) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver bit
holder, and screwdriver bit.
GO TO NEXT PAGE
2
M04-4208-13
56
52
53
49
54
51
48
52
53
51
50
55
56
48
47
2
7
M04-4208-14
51
