TM 1-1520-238-23
Change 1 9-295
9.77.
MULTICHANNEL DIMMING CONTROLLER CHASSIS DISASSEMBLY/ASSEMBLY
(AVIM) – continued
(3) Install receptacle (A403)J1 (31) on panel (2).
(a) Install four screws (32) through washers
(38), panel (2), and receptacle (A403)J1
(31).
NOTE
On receptacle (A403)J1 install grounding
terminal lug on lower left-hand corner of
receptacle flange.
(b) Install terminal lug (36) on screw (32).
(c) Install four nuts (33), lockwashers (34), and
washers (35) on screws (32).
(d) Hold nuts (33). Torque four screws (32) to
7 INCH-POUNDS. Use torque wrench,
screwdriver bit holder, and screwdriver bit.
(4) Install board (26) on panel (2).
(a) Install five screws (27) through front of pan-
el (2).
(b) Install board (26), with spacers (30) at-
tached, on five screws (27).
(c) Install five nuts (28) and washers (29) on
screws (27).
(d) Torque five screws (27) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver
bit holder, and screwdriver bit.
GO TO NEXT PAGE
2
M04-4208-17
35
34
32
37
33
36
31
M04-4208-18
26
2
29
27
28
30
