TM 1-1520-238-23
9-299
9.78.
PILOT OR CPG UTILITY LIGHT AND MOUNTING BASE REMOVAL/INSTALLATION – continued
e. Remove screw (1) from clamp (2) and airframe
(3).
f. Identify and depin wires (4) from splices (5)
(TM 55-1500-323-24).
g. Remove utility light (6) from mounting base
(7).
(1) Loosen thumbscrew (8).
(2) Remove utility light (6).
h. Remove base (7) from airframe (9).
(1) Remove two screws (10) and washers (11)
from airframe (9).
(2) Remove base (7).
9.78.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
9.78.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.78.6. Installation
a. Install base (7) on airframe (9).
(1) Position base (7) on airframe (9).
(2) Install two screws (10) and washers (11).
GO TO NEXT PAGE
M04-1260-2
3
2
1
4
5
8
7
6
M04-1260-3
11
7
10
M04-1260-6
9
