TM 1-1520-238-23
9-321
9.87.
CPG INTR LT PANEL RESISTOR R3, R4, OR R5 REPLACEMENT (AVIM) continued
9.87.6. Installation
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Install new resistor (1) on circuit card assem-
bly A1 (2).
(1) Position resistor (1) on card (2).
(2) Install two screws (4) through resistor (1),
board (2), washers (5), and nuts (6).
(3) Solder identified wires (3) on resistor (1). Use
soldering iron and solder (item 189, App F)
(TM 55-1500-323-24).
b. Inspect (QA).
END OF TASK
M04-5081-3
6
5
1
4
2
3