TM 1-1520-238-23
9-500 Change 4
9.133.
STABILATOR RELAY BOX REMOVAL/INSTALLATION – continued
9.133.4. Cleaning
a. Clean mounting surface (para 1.47).
b. Remove sealant from faying surface of mount
bracket and airframe (para 1.47).
9.133.5. Inspection
a. Check stabilator relay box and mounting
points for cracks. None allowed.
b. Check removed and attaching parts for dam-
age (para 9.126).
c. Check wires and terminals for wear, cracks,
and cuts (para 9.126).
d. Check removed and attaching parts for corro-
sion (para 1.49).
9.133.6. Installation
a. Install stabilator relay box (1).
(1) Position stabilator relay box (1).
(2) Install four screws (3) through washers (4)
and relay box (1) in airframe (5).
(3) Apply sealant to faying surface of mount
bracket (6). Use sealing compound
(item 175, App F) and brush (item 34,
App F).
b. Attach connector P1077 (2) to relay box (1).
GO TO NEXT PAGE
1
2
6
4
3
M04-3604-3
5
