TM 1-1520-238-23
10-294
10.61.
PILOT FUEL PANEL SUPPORT PANEL REPLACEMENT (AVIM) – continued
10.61.3. Removal
a. Remove two posts (1) from support panel (2).
(1) Remove two screws (3) from front side of
support panel (2) and washers (4) and posts
(1) from back side.
b. Detach grounding jumper (5) from panel (2).
(1) Remove nut (6), washer (7), terminal lug (8),
nut (9), lockwasher (10), and washer (11)
from screw (12).
(2) Remove screw (12) from panel (2).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
c. Remove receptacle connector (13) from panel
(2).
(1) Identify and desolder wires (14) from connec-
tor
(13).
Use
soldering
iron
(TM 55-1500-323-24).
(2) Remove nut (15), washer (16), and solder lug
(17) from connector (13).
(3) Remove connector (13) from panel (2).
10.61.4. Cleaning
a. Clean removed and attaching parts and sur-
faces (para 1.47).
GO TO NEXT PAGE
M04-3907-2
6
7
8
5
91011
1
4
2
3
3
12
17
13
16
15
14
