TM 1-1520-238-23
10-415
10.99.
NO. 1 ENGINE CROSSFEED/SHUTOFF VALVE REMOVAL/INSTALLATION – continued
d. Detach electrical connector P938 (1) from re-
ceptacle (L1)J1 (2).
e. Remove crossfeed hose (3) from No. 1 engine
crossfeed/shutoff valve (4).
(1) Remove four bolts (5) and washers (6).
(2) Remove hose (3).
(3) Remove and discard gasket (7).
f. Remove forward fuel hose (8) from valve (4).
(1) Remove four bolts (9) and washers (10).
(2) Remove hose (8) and gasket (11) from valve
(4). Discard gasket (11).
g. Remove valve (4) from valve support (12).
(1) Remove sealant from support (12).
(2) Remove two bolts (13), nuts (14), and wash-
ers (15).
h. Remove support (12) from bracket (16).
(1) Remove three screws (17) and washers (18).
i. Remove valve (4) from breakaway valve (19).
(1) Remove four nuts (20) and washers (21) from
studs (22).
(2) Remove valve (4) from valve (19).
(3) Remove and discard packing (23).
GO TO NEXT PAGE
2
4
1
5
3
7
M04-302-2
6
4
11
8
9
10
M04-302-3
M04-302-4
15
14
12
13
4
12
17
18
16
19
23
22
4
21
20
M04-302-5
