TM 1-1520-238-23
11-189
11.38.
PILOT COLLECTIVE STICK SUPPORT REMOVAL/INSTALLATION – continued
11.38.3. Removal
a. Remove rod end (1) from collective bellcrank
(2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5), washer (6), and bushing (7).
(4) Remove rod end (1).
b. Remove rod end (8) from bellcrank (2).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), and bushing
(13).
(4) Remove rod end (8).
c. Detach connector (A334)P1 (14) from recep-
tacle J272 (15).
(1) Remove screw (16), washer (17), clamp (18),
and spacer (19) from wire harness (20).
(2) Detach connector (A334)P1 (14) from recep-
tacle J272 (15).
GO TO NEXT PAGE
M04-3460-2
8
12
11
2
10
9
5
6
2
1
3
4
13
7
18
16
19
15
14
M04-3460-5
20
17
