TM 1-1520-238-23
Change 4
11-209
11.42.
CPG COLLECTIVE STICK SUPPORT ASSEMBLY DISASSEMBLY/ASSEMBLY (AVIM) continued
11.42.6. Assembly
a. Lubricate and install new packing (31) in arm
(12). Use petrolatum (item 138, App F).
b. Install shaft (24) on arm (12).
(1) Install shaft (24) through arm (12), cam (29),
and lever (30).
NOTE
Ensure shaft arm, cam valley, and lever
tip are facing same direction.
(2) Aline cam (29) and lever (30) with holes in
shaft (24).
(3) Install two new rivets (28) in cam (29) and
lever (30) (TM 1-1500-204-23).
CAUTION
Ensure that pin is no longer than 0.453
INCH. A longer pin may interfere with
SPAD assembly function.
c. Install guide (23) on shaft (24).
(1) Install pin (27) through shaft (24), guide (23),
and washer (26).
(2) Install new cotter pin (25).
CAUTION
Ensure that pin is no longer than 0.453
INCH. A longer pin may interfere with
SPAD assembly function.
d. Install guide (18) on arm (12).
(1) Install spring (22) and guide (18) on guide
(23).
(2) Install pin (21) through arm (12), guide (18),
and washer (20).
(3) Install new cotter pin (19).
GO TO NEXT PAGE
20
26
28
19
29
24
25
12
21
27
18
22
23
M04-4285-6
30
31
28