TM 1-1520-238-23
11-224
11.46.
PILOT CYCLIC STICK COVER REMOVAL/INSTALLATION – continued
f. Remove cover (15) from cyclic stick (16).
(1) Remove four screws (17) and washers (18)
from cover (15) and housing (19).
(2) Remove 17 screws (20) and washers (21)
from cover (15) and floor (22).
(3) Remove cover (15).
11.46.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
11.46.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age. None allowed.
c. Check removed and attaching parts for corro-
sion (para 1.49).
11.46.6. Installation
a. Install cover (15) on cyclic stick (16).
(1) Position cover (15) over cyclic stick (16).
(2) Install 17 screws (20) and washers (21)
through cover (15) into floor (22).
(3) Install four screws (17) and washers (18)
through cover (15) into housing (19).
GO TO NEXT PAGE
21
22
19
16
M04-1702-4
20
15
18
17
ROTATED
M04-1702-5
16
15
19
22
20
21
17
18
