TM 1-1520-238-23
Change 6
11-219
11.45.
PILOT CYCLIC STICK REMOVAL/INSTALLATION continued
c. Remove cyclic stick (7) from housing (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), bearing
(12.1), and sleeve spacer (13).
(4) Remove
two
rivets
(16.1)
(TM 1-1500-204-23).
(5) Remove bracket (16) with indicator.
(6) Remove bearing (15) and spacer ring (14).
d. Remove link (1) from stick (7).
(1) Remove and discard cotter pin (17).
(2) Remove nut (18) and washer (19).
(3) Remove bolt (20) and bushing (21).
11.45.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.45.5. Inspection
a. Check removed and attaching parts for cracks
(para 11.5).
b. Check removed and attaching parts for dam-
age (para 11.5).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
9
10
M04-1700-3A
12
13
14
16.1
11
8
7
16
12.1
15
M04-1700-4
1
17
18
21
20
7
19