TM 1-1520-238-23
11-319
11.68.
CPG ADJUSTABLE CYCLIC STICK LINK REMOVAL/INSTALLATION – continued
b. Install lower end of link (1) to base (2). Torque
nut (4) 12 to 25 INCH-POUNDS.
(1) Aline link (1) with base (2).
(2) Install bushing (8) through base (2) and link
(1).
(3) Insert bolt (6) through washer (7), bushing
(8), base (2), and link (1).
(4) Install washer (5).
(5) Check fit of self-retaining bolt (6) (para 11.1).
(6) Install nut (4). Torque nut (4) to 12 INCH-
POUNDS. Use torque wrench.
(7) Increase torque to aline cotter pin hole, but do
not exceed 25 INCH-POUNDS.
(8) Install new cotter pin (3).
c. Inspect (QA).
END OF TASK
3
4
5
1
2
8
7
6
M04-1678-5
