TM 1-1520-238-23
11-350
11.80.
CPG CYCLIC STICK TRIM AND FORCE FEEL RELEASE SWITCH REPLACEMENT
11.80.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.80.2. Initial Setup
Tools:
Electrical tool kit (item 378, App H)
Light duty laboratory apron (item 27, App H)
Heat protective gloves (item 155, App H)
Adjustable air filtering respirator (item 262, App H)
5-watt electric soldering iron (item 333, App H)
Materials/Parts:
Adhesive (item 14, App F)
Solder (item 189, App F)
Tape (item 202, App F)
Personnel Required:
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
References:
TM 1-1520-238-T
TM 55-1500-323-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
11.80.3. Removal
a. Enter CPG station (para 1.56). Observe all
safety precautions.
b. Remove grip cap (1).
(1) Remove sealant from heads of five screws
(2) and screw (3) (para 1.47).
(2) Remove five screws (2) and screw (3).
(3) Remove cap (1).
c. Debond and remove switch (4) from control
grip (5).
GO TO NEXT PAGE
M04-3557-1
3
2
1
4
5
