TM 1-1520-238-23
11-353
11.80.
CPG CYCLIC STICK TRIM AND FORCE FEEL RELEASE SWITCH REPLACEMENT – continued
WARNING
Ensure wiring inside the cyclic grip is
properly restrained with lacing tape
prior to reassembly. Failure to comply
may cause uncommanded firing of a
weapon system.
b. Install switch (4) in control grip (5).
(1) Apply a small bead of adhesive (item 14,
App F) to mating surface of switch mounting
shoulder (7).
(2) Install switch (4) in mounting slot.
(3) Restrain wires (6). Use tape (item 202,
App F) (TM 55-1500-323-24).
c. Inspect (QA).
d. Install cap (1).
(1) Position cap (1) on grip (5).
(2) Install five screws (2) and screw (3).
(3) Apply a light coat of adhesive (item 14,
App F) over heads of screws (2) and (3)
heads.
e. Clean excess sealant from control grip (5)
(para 1.47).
f. Inspect (QA).
g. Perform flight control system maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-3557-5
2
1
7
4
3
6
5
