TM 1-1520-238-23
11-556
11.126. LONGITUDINAL F.S. 164.38 BELLCRANK REMOVAL/INSTALLATION – continued
b. Install rod (20) on bellcrank (12). Torque nut
(22) 30 to 40 INCH-POUNDS.
(1) Position rod (20) on bellcrank (12) to aline
bolt holes and bushing (25) in bellcrank (12).
(2) Install bolt (23) through washer (24), bell-
crank (12), bushing (25), and rod (20) (para
11.1).
(3) Check fit of self-retaining bolt (23) (para
11.1).
(4) Install nut (22). Torque nut (22) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (21).
GO TO NEXT PAGE
M04-2384-8
25
22
23
24
21
20
12
