TM 1-1520-238-23
11-559
11.127. LONGITUDINAL F.S. 164.38 PUSH-PULL ROD REMOVAL/INSTALLATION
11.127.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.127.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Flight control rigging kit (item 267, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
11.44
Collective stick cover removed
1.72
External primary hydraulic power applied
9.32
Transformer-rectifier No. 2 removed
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
CAUTION
To prevent damage to flight control sys-
tem components, do not use force if bind-
ing or roughness occurs while moving
controls with hydraulic power.
11.127.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
GO TO NEXT PAGE
M04-3592-1
