TM 1-1520-238-23
11-561
11.127.
LONGITUDINAL F.S. 164.38 PUSH-PULL ROD REMOVAL/INSTALLATION – continued
g. Remove longitudinal F.S. 164.38 push-pull rod
(13) from longitudinal F.S. 164.38 bellcrank
(14).
(1) Remove and discard cotter pin (15).
(2) Remove nut (16), weight (17), and bushing
(18) from bolt (19).
(3) Remove bolt (19), two washers (20), and
weight (21).
h. Remove rod (13) from longitudinal F.S. 176
servocylinder (22).
(1) Remove and discard cotter pin (23).
(2) Remove nut (24).
(3) Remove bolt (25) and washer (26) from ser-
vocylinder clevis (27).
(4) Remove rod (13).
11.127.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
11.127.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
17
16
15
18
19
M04-3592-5
22
25
26
27
13
24
23
14
20
21
