TM 1-1520-238-23
11-666
Change 1
11.151. DIRECTIONAL F.S. 121.40 BELLCRANK AND BRACKET REMOVAL/INSTALLATION – continued
11.151.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
b. Remove pilot floor panel (1) from pilot floor
(2).
(1) Remove 28 screws (3) and washers (4).
c. Remove rod end (5) from bellcrank (6).
(1) Remove and discard cotter pin (7).
(2) Remove nut (8).
(3) Remove bolt (9), washer (10), and bushing
(11) from rod end (5), and bellcrank (6).
d. Remove rod end (12) and rig connecting link
(13) from bellcrank (6).
(1) Remove and discard cotter pin (14).
(2) Remove nut (15).
(3) Remove bolt (16) washer (17), and bushing
(18) from bellcrank (6).
(4) Remove rod end (12), link (13), and bushing
(19).
e. Remove bellcrank (6) from bracket (20).
(1) Remove and discard cotter pin (21).
(2) Remove nut (22).
(3) Remove bolt (23), washer (24), and bushing
(25), from bellcrank (6) and bracket (20).
f. Remove bracket (20) from airframe (26).
(1) Remove four nuts (27) and washers (28).
(2) Remove four bolts (29) from airframe (26).
GO TO NEXT PAGE
1
2
3
4
M04-3390-2
13
6
17
12
14
15
19
18
16
5
7
8
M04-3390-3A
23
22
21
20
25
24
26
29
28
27
10
11
9
