TM 1-1520-238-23
Change 2
11-901
11.207.
PILOT COLLECTIVE CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER
(LVDT) REMOVAL – continued
g. Remove LVDT (10) from bracket (15).
(1) Remove and discard cotter pin (16).
(2) Remove nut (17) and washer (18).
(3) Slowly slide bolt (19) to clear bracket (15).
NOTE
Do not remove potentiometer.
(4) Remove LVDT (10).
(5) Slide bolt (19) back through bracket (15).
(6) Install washer (18) and nut (17) to hold poten-
tiometer (4) in place.
h. Remove and retain connector (1) and braided
shielding (19.1) from LVDT wire harness (20),
if required (TM 55-1500-323-24).
i. Remove LVDT (10) from rod end (21).
(1) Remove lockwire.
(2) Loosen nut (22).
(3) Remove LVDT (10) from rod end (21).
(4) Remove keywasher (23).
GO TO NEXT PAGE
M04-1745-5A
16
17
10
18
15
19
4
1
20
19.1
M04-1745-4
10
23
22
21
