TM 1-1520-238-23
11-965
11.225.
STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY – continued
11.225.3. Disassembly
a. Measure and record distance between key-
washer (1) and base of clevis (2) on actuator
(3).
b. Remove clevis (2) from actuator (3).
(1) Remove lockwire.
(2) Hold clevis (2) and loosen nut (4). Use open
end wrench.
(3) Hold actuator (3). Remove clevis (2) and key-
washer (1). Use open end wrench.
(4) Remove nut (4) from clevis (2).
c. Remove actuator (3) from actuator (5).
(1) Remove and discard four cotter pins (6).
(2) Remove four nuts (7).
(3) Remove four bolts (8) and washers (9).
(4) Pull actuator (3) and actuator (5) apart.
(5) Remove spacer (10).
GO TO NEXT PAGE
M04-3395-1
3
2
1
4
M04-3395-2
10
5
7
6
9
8
3
