STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY continued

STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY - TM-1-1520-238-23-7-2_147

STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY continued - TM-1-1520-238-23-7-2_149

TM-1-1520-238-23-7-2 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual
Page Navigation
121

TM 1-1520-238-23 Change 7 11-967 11.225. STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY – continued 11.225.6. Assembly CAUTION Ensure all actuator components are com- pletely dry before assembly. a. Install spacer (10) on actuator (5). (1) Aline hole (11) in spacer (10) with locating pin (12) on actuator (5). (2) Install spacer (10) on actuator (5). b. Assemble two actuators (3) and (5). (1) Aline locating pin (13) on actuator (3) with locating hole (14) in spacer (10). (2) Place actuators (3) and (5) together. (3) Install four bolts (8) through washers (9) and actuators (3) and (5). (4) Install four nuts (7). (5) Install four new cotter pins (6). (6) Apply sealant to mating surfaces of actuators (3) and (5). Use sealant (item 158A, App F). c. Apply corrosion preventive compound to threads of clevis prior to re-assembly. Use Corrosion preventive compound (item 63, App F). GO TO NEXT PAGE 13 3 10 12 5 7 6 14 9 8 3 11 M04-3395-4A

Privacy Statement
Press Release
Contact