TM 1-1520-238-23
11-968
Change 7
11.225.
STABILATOR ACTUATOR DISASSEMBLY/ASSEMBLY – continued
d. Install and adjust clevis (2) on actuator (3).
Torque nut (4) to 300 INCH-POUNDS.
(1) Hand tighten nut (4) on clevis (2).
(2) Install keywasher (1) on clevis (2).
(3) Install clevis (2) in actuator (3) until distance
between keywasher (1) and base of clevis (2)
matches previously recorded measurement.
(4) Hold clevis (2). Use open end wrench.
(5) Torque nut (4) to 300 INCH-POUNDS. Use
torque wrench and crowfoot.
e. Inspect (QA).
f. Lockwire nut (4) to keywasher (1). Use wire
(item 226, App F).
g. Inspect (QA).
h. Install stabilator actuator (para 11.224).
END OF TASK
M04-3395-7
3
2
1
4
