TM 1-1520-238-23
11-1020
11.240.
CPG DIRECTIONAL CONTROL PEDAL WEIGHT REMOVAL/INSTALLATION
11.240.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.240.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
4-ounce hand sealant gun (item 159, App H)
Adjustable air filtering respirator (item 262, App H)
30 - 150 inch-pound 3/8-inch drive click type torque
wrench (item 441, App H)
0 - 30 inch-pound 1/4-inch drive dial indicator torque
wrench (item 445, App H)
Materials/Parts:
Sealing compound (item 175, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
This task is typical for left and right direc-
tional pedals.
11.240.3. Removal
a. Remove weight (1) from pedal (2).
(1) Remove three nuts (3), washers (4), and
screws (5).
(2) Remove nut (6), washer (7), screw (8), weight
(1), and shim (9) from pedal (2).
(3) Remove weight (1).
11.240.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
b. Remove sealant residue from pedal (para
1.47).
GO TO NEXT PAGE
M04-3348-1
2
7
6
9
5
8
1
4
3
