TM 1-1520-238-23
11-1021
11.240.
CPG DIRECTIONAL CONTROL PEDAL WEIGHT REMOVAL/INSTALLATION – continued
11.240.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
11.240.6. Installation
a. Install weight (1) on pedal (2). Torque three
screws (5) to 70 INCH-POUNDS. Torque one
screw (8) to 20 INCH-POUNDS.
(1) Peel or add shims (9) (if necessary) to fill void
between weight (1) and pedal (2).
(2) Apply sealing compound in void between
weight (1) and pedal (2). Use sealant gun and
sealing compound (item 175, App F).
(3) Aline shim (9) and weight (1) on pedal (2).
(4) Install screw (8) through pedal (2), shim (9),
weight (1), washer (7), and nut (6).
(5) Install three screws (5), washers (4), and nuts
(3).
(6) Torque screw (8) to 20 INCH-POUNDS. Use
torque wrench.
(7) Torque three screws (5) to 70 INCH-
POUNDS. Use torque wrench.
b. Inspect (QA).
c. Install CPG directional pedal (para 11.239).
END OF TASK
M04-3348-3
2
7
6
9
5
8
1
4
3
