TM 1-1520-238-23
11-1227
11.288.
RIGGING UPPER LONGITUDINAL FLIGHT CONTROLS – continued
q. Check that BASIC DIM pointer (17) alines with
center point of alinement tool (22).
(1) Install alinement tool (22) in forward bolt head
(23) of longitudinal bellcrank (24).
(2) Place rigging fixture (20) next to alinement
tool (22).
(3) If BASIC DIM pointer (17) does not aline with
center point of alinement tool (22), adjust col-
lective servocylinder rod end (para 11.297).
(4) If BASIC DIM pointer (17) alines with center
point of alinement tool (22), go to next step.
(5) Remove alinement tool (22) and rigging fix-
ture (20).
r. Check that BASIC DIM pointer (17) alines with
center point of alinement tool (22).
(1) Install alinement tool (22) in aft bolt head (25)
of longitudinal bellcrank (24).
(2) Place rigging fixture (20) next to alinement
tool (22).
(3) If BASIC DIM pointer (17) does not aline with
center point of alinement tool (22), adjust lon-
gitudinal servocylinder rod end (para 11.297).
(4) If BASIC DIM pointer (17) alines with center
point of alinement tool (22), go to next step.
(5) Remove rigging fixture (20).
s. Remove -5 rig pin (12) from longitudinal F.S.
165 bellcrank (10).
GO TO NEXT PAGE
M04-3019-8
24
17
22
23
20
17
25
22
24
M04-3019-9
20
M04-3019-10
10
12
