TM 1-1520-238-23
11-1230
11.288.
RIGGING UPPER LONGITUDINAL FLIGHT CONTROLS – continued
z. Remove cyclic sticks (7) warning covers (13).
aa. Check longitudinal controls for freedom of
movement and 0.0625 INCH clearance be-
tween control rods, bellcranks, and structure.
(1) Slowly move cyclic stick (7) full forward,
check for freedom of movement and mini-
mum 0.0625 INCH clearance between con-
trol rods,bellcranks, and structure.
(2) Slowly move cyclic stick (7) full aft, check for
freedom of movement and minimum 0.0625
INCH clearance between control rods, bell-
cranks, and structure.
(3) If clearance is not minimum 0.0625 INCH, go
to step u.(2).
(4) If clearance is minimum 0.0625 INCH, go to
next step.
ab. Disconnect maintenance headset (para 1.134).
ac. Remove external hydraulic power from air-
craft (para 1.72).
ad. Inspect (QA).
ae. Install access panels L200 and R200 (para
2.2).
END OF TASK
M04-3019-17
7
13
