TM 1-1520-238-23
Change 8
16-9
16.2.
PYLON REMOVAL/INSTALLATION - continued
16.2.3. Removal
a. Remove pylon (1) from wing (2).
(1) Support pylon (1) under wing (2).
(2) Remove four bolts (3) that secure pylon (1) to
wing (2).
(3) Slowly lower pylon (1) straight down from
wing (2).
16.2.4. Cleaning
a. Wipe pylon and mounting area. Use cloth
(item 52, App F).
16.2.5. Inspection
a. Check mounting area, actuator and top plate
assembly, rack, pins, and fairings for cracks
and warps. None allowed.
b. Check connector for cracks, broken pins, or
damaged wiring connections (para 16.1).
c. Check packing and retainer inside of wing hy-
draulic coupling quick disconnect (female
half) for cuts or deterioration. None allowed.
(1) If packing and/or retainer are found dam-
aged,
replace
both
parts
(TM 1-1500-204-23).
(2) If wing hydraulic coupling quick disconnect is
found damaged, replace quick disconnect
(para 7.100).
d. Check pylon for loose or missing hardware
(para 16.1).
GO TO NEXT PAGE
TYPICAL 4 PLACES
3
2
1
M04-1217-2
3
