TM 1–1520–238–T–1
4–12
Change 5
4–2
DASE – INTERACTIVE FD/LS CHECK (cont)
4–2
TASK
RESULT
CAUTION
Do not attempt to move flight controls
against any motion restriction. Failure to
comply could result in damage to the SPAD
shear pins.
t. Operate pilot cyclic
stick to full left, full
right, full back,
and full forward
positions. Apply
alternate foot
pressure to
directional control
pedals. Operate pilot
collective stick to full
up and full down
positions.
If flight control movement is
restricted, perform the
following:
On DEK, press and release
MID SHIFT and MNO/5 keys
(ADC) or N key on the CDU
(ADD).
When PERFORM
CORRECTIVE ACTION
appears on VDU stop DASE
FD/LS testing and refer to
TM 1-1520-238-T-7 to
perform flight rigging
operational check(s) as
required.
If pilot flight control
movements are restricted, go
to CPG station and repeat
step t.
If flight control movement is
unrestricted, press and
release L SHIFT and YZ*/9
keys (ADC) or Y key on the
CDU (ADD).
When CENTER ALL
CONTROLS AND ENGAGE
FORCE TRIM ACK VIA KBD
appears on VDU, go to next
step.
u. Remove foot
pressure from
directional control
pedals and center
cyclic and collective
sticks.
