TM 1-1520-238-T-7
Change 5
11–379
11–93.
CPG STAB DEG/NOM SPD PLACARD PANEL EDGE-LIGHT – DOES NOT LIGHT
11–93
Tools:
Nomenclature
Part Number
Tool Kit, Electrical
SC518099CLA06
Repairer’s
Multimeter, Digital
AN/PSM-45
Personnel Required:
68X
Armament/Electrical Systems Repairer
One person to assist
References:
TM 1-1520-238-T-6
TM 1-1520-238-23
WARNING
Turn off power before detaching or
attaching wires and connectors. High
current 28 VDC or 115 VAC is present.
Failure to do so could result in death or
serious injury.
1. Detach P692 from (DS162)J692.
Check for 5 VDC between P692–HI and
P692–LO.
Is voltage present?
YES
Replace CPG STAB DEG/NOM
SPD placard panel (DS162)
(TM 1-1520-238-23).
NO
Go to step 2.
2. On CPG INTR LT panel, rotate INTR CONTROL
switch CCW to OFF.
Check for open between P692–HI and
(A326)TB1–41–C.
Does open exist?
YES
Repair open wire.
Go to paragraph 11–88.
NO
Go to step 3.
3. Check for short between P692–HI and ground.
Does short exist?
YES
Repair shorted wire.
Go to paragraph 11–88.
NO
Go to step 4.
4. Check for open between P692–LO and
(A326)TB1–40–C.
Does open exist?
YES
Repair open wire.
Go to paragraph 11–88.
NO
Troubleshoot CPG edge lights
TM 1-1520-238-T-6.
END OF TASK
