TM 1-1520-238-23
3-206
Change 1
3.56.
PILOT BRAKE MASTER CYLINDERS REMOVAL/INSTALLATION – continued
h. Install supports (11) and (12). Torque clamp
(13) to 7 INCH-POUNDS.
(1) Position supports (11) and (12) on cylinder (1)
and tube (8).
NOTE
Position clamp screw as required to pre-
vent chaffing.
(2) Install clamp (13). Torque screw to 7 INCH-
POUNDS. Use torque wrench.
i. Install hose (7) on tube (8).
(1) Install hose (7) on tube (8).
(2) Hold tube fitting (9). Tighten nut (10).
j. Inspect (QA).
k. Bleed brake system (para 1.45).
l. Set parking brakes (para 1.61).
m. Install gun turret (TM 9-1090-208-23).
n. Perform main landing gear maintenance op-
erational check (TM 1-1520-238-T).
END OF TASK
11
8
1
12
13
9
10
7
M04-2746-7A
